Brief introduction for Remote Transmitter
1. Mode Button: hold over 3 seconds to turn on/off the remote transmitter
Press the button to choose the different modes there are 5 modes as followings.
a. V is the Vibration mode for the Training Collar
b. S is the Static mode for the Training Collar
c. 8 is the intensity Level of vibration and Static
d. R is the running mode for Remote Beeper and also reactivates the Remote Beeper functions after disabled
by the Location mode
e. T is the Tone Mode and allows to choose from 9 different Remote Beeper Sounds
f. L is the Location Mode and also disables the Remote Beeper Functions
g. 8 is the different tone sound
2. Channel button: Choose the different channels for Training Collar or/and beeper collar
3. Transmitter button: confirm the operation and send the signal to the collars
4. Up/down button: adjust intensity levels of stimulation and choose the different tone sounds
5. Charging jack: connect to the charger
Brief introduction for Training Collar
1. Waterproof Training Collar: Corrects the dog behavior by stimulations (vibration and/or shock).
2. On/Off button: turns the Training collar on/off. Also set to be ready to encode the transmitter and
Training Collar by holding the on/off button for 10 seconds.
3. Receiver indicator Light: Indicates when turned on/off and also serves as low-battery indicator and after charge full
4. Charging jack with cover: for connecting the charger.
Brief introduction for Remote Beeper
1. Waterproof Remote Beeper: Beeps with a tone and frequency set by the user.
2. On/Off button: Turns the Remote Beeper on/off. Also set to be ready to encode the transmitter and remote
Beeper by holding the on/off button for 10 seconds.
3. Receiver indicator Light: Indicates when turned on/off and also serves as low-battery indicator and after
charge full
4 Charging jack with cover: For connecting the charger.
Attention
1.After the first wear collars, some pets will be uncomfortable, let pet have adapt to the time, in determining
the pet has adapted to enable the electric shock function..
2. Digital audio transmission technology, remote control, remote control signal can penetrate obstacles, remote
controller need not pointed directly at the receiver.But obstacles will affect the range of remote controller.
3. The effective distance of the point at which the barrier-free linear distance, such as space interference
signal or shielding effect, the actual remote control distance may be shortened.
4.This product is used to discipline pet, discipline pet want to have patience and time, persistent work wonders.
5.The receiver of vibration and shock was used to prevent pet misconduct, warned not to play with pets.
6.This product is currently the most humane pet training tool, in the correct use method can safely and effectively
training pet and no damage.
7. Although there is a waterproof seal design, but not to the receiver in water for a long time. Remote control
please note waterproof.
Package included:
2 x Collar receiver
1 x Test light
1 x Transmitter
1 x Adjustable collar strap
1 x Charger
2 x long electric antenna
2 x short electric antenna
1 x User manual